As a small, flexible company we optimise and develop highly corrected objectives and optical systems. If your system needs a workover, you plan a new project or you need an assembly of your system, which corresponds to the conditions of your application, then you are among the right contact partners. We would appreciate working with your optical design or develop with own optical designers a suitable solution for you.
From optic design, mechanic design, prototype production up to series, everything from one hand.
Below you will find as a sample self constructed objectives.

System of 7 lenses, vignetting free R 2.8/50



The graphic shown is an example for the following products
• anastigmatic, orthoscopical objectives for ½”, 2/3” and 1”-CCD-cameras
• very high correction condition, free of distortion
• proper repair of the colour magnifying mistake
• high values of the relative illumination intensity in the field
• highest imaging capacity at the initial opening
• highly opened modified double-Gauss types
• wide-angle systems from Retro-Focus type with magnified width of intersection
• ultra wide-angle systems with special imaging perspective

The graphic shown is an example for the following products
• microscope objectives for technical application
• plan achromatic lens, plan apochromatic lens with big field
• microscope objectives with Lond-Distance characteristics
• system of tube lenses
• projection lenses and oculars (CVD-free and compensation systems)
• beam splitter system, vertical illuminators
• adjusted illumination systems for microscopy